Disassembly report: Yubo 65W 1a1c Gan charger

2021-04-23

Recently, the charging head network has obtained the first 65W Gan fast charging charger of YOOBAO Yubo. This charger is equipped with the popular 1a1c interface on the market, which supports 30W and 65W output respectively. When the two ports are used at the same time, the total output power is 57W, which can meet the daily charging needs of pen and mobile phones. The following small make up to share with you the disassembly of this charger, to see how the material inside.

Recently, the charging head network has disassembled Yubo 20W 1a1c fast charging charger. Interested partners can click the blue font to view it.

YOOBAO Yubo's 65W 1a1c Gan fast charge adopts the conventional square shape design, with foldable pins and 1a1c interface, which is also very mainstream. It has its own ingenuity to inlay 65W bright silver metal sheet on the body. The charger supports FCP, SCP, pd3.0 and PPS fast charging protocols, and has 3.3-21v3a PPS voltage range. Mobile phones of Xiaomi, Huawei, apple and other brands as well as notebook computers can be charged quickly.

We have learned from the disassembly of the charging head network that the primary stage of this charger is equipped with two small boards. The components on the main board are glued and reinforced, and the front and back sides are equipped with heat conductive pads and brass heat sinks to help heat dissipation. The charger adopts the current mainstream primary controller of Anson ncp1342 and MPs mp6908a, and the switch power supply is composed of innoseco in650d02 Gan power chip and vian synchronous rectifier. Silicon power sp1231fl is the secondary step-down of usb-a port, and British chip ip2726 is used for protocol identification to control the dual port output voltage. In addition, Yuguang and wanjingyuan capacitors are used for input and output filtering.